On a home network they are typically the address of the router, which may well be 192.168.0.1 or something similar. Then to access the internet itself you need to provide (or be provided with through DHCP) the address of the internet gateway and possibly a DNS server address. The netmask, again, can be given by DHCP, otherwise you will have to enter the netmask of your network, typically 255.255.255.0 The IP address must be unique on your network. This must be within the range of your network's IP addresses, typically something like 192.168.0.x where x is between 1 and 255. The items that can be set vary depending on the printer in use. Through DHCP - For example your home internet router would provide the IP address for you. You can press the button to display the options menu and change the print settings or the number of copies to be printed.There are two ways you can get the IP address and netmask: Once you have provided a MAC address and physically connected it to the network then you need an IP address and netmask. The second bit of the first byte must be 1.The lowest bit of the first byte must be 0.There are a set of prefixes that are reserved for special purposes:.There are a couple of rules and regulations about what a MAC address can be, but most of the time you can just make one up: If you do not have a MAC address then you have to make one up.
0 Comments
Leave a Reply. |